Nanolex Si3D Matte SET

   
Schrijf een beoordeling
| Ask a question
nanolexItem number: NXSI3DMS30

Packing: 30 ml
Price:
€67.99 EUR

Taxes included. Shipping is calculated in the till

Stock:
Only 1 article left
   

Description

The Nanolex Si3D Matte SET contains all the products you need to apply the Ultra Matte Sealant correctly. This set consists of the following products:

  • Nanolex Microfiber Towel to remove EX and sealant residue.
  • Nanolex Cotton Applicators for applying the coating.
  • Nanolex EX 500ml, for degreasing and preparing the surfaces to be treated.
  • Nanolex Si3D Matte in 30ml or 50ml, this is the coating itself and must be applied correctly to achieve maximum performance and durability.

 

Nanolex Si3D Matte SET is a special coating for matte paints, wraps, dips and other matte surfaces. It is designed to create an extremely long-lasting chemical bond with the matte surface and provide molecular protection without glare. This kit can be used on all matte paints, wraps, dips and other matte surfaces. The treated surfaces will stay clean longer and will also be easier to wash.

It provides strong long-lasting protection for all delicate matte surfaces, leaving a natural matte appearance. The surfaces to be treated must be properly prepared with Nanolex EX. With proper maintenance, Nanolex Si3D Matte SET has a durability of approximately 30.000 km on the treated surfaces.

 

User

 

  1. First remove all scratches from the surface to be treated, once the coating is on the car, it can only be removed by heavy polishing or sanding;
  2. degrease the surface with a degreaser such as Nanolex EX and 2 microfibre cloths;
  3. make sure the surface is completely dry and protected;
  4. apply a few drops to the applicator and apply in small parts of about 50x50cm to the surface, working in cross patterns;
  5. keep rubbing and make sure there are no darker spots or small hills on the paint, if these dry and harden you will have to sand;
  6. when the coating becomes transparent and appears to have dried, wipe the surface with a microfiber cloth;
  7. apply another layer immediately if you want to apply two layers, if not, work the same way all over the panel. If you wait too long to finish your panel, after 20 minutes the first coat will repel your next 50x50cm section and it will not adhere properly. When you start a panel, you must finish it immediately. If you do not want to treat certain panels, tape off the parts that you can get over with your applicator;
  8. let it dry for 24 hours before driving back. During this 24 hours, keep the coating free from liquids, etc. Higher temperatures such as putting your car in the sun or an infrared lamp will accelerate the drying process;
  9. after 78 hours, the coating is fully cured and is resistant to chemicals up to pH 2 and you can wash your car again.

 

Payment & Security

American Express Apple Pay Bancontact Google Pay Teacher Mastercard PayPal Shop pay Union Pay Visa

Your payment information is processed securely. We do not keep credit card details, nor do we have access to your credit card information.

Maybe this is also something for you?

Recently viewed