Gtechniq Crystal Serum Light

   
Schrijf een beoordeling
| Ask a question
GtechniqItem number: CSL 0.03

Content: 30 ml
Price:
€79.99 EUR

Taxes included. Shipping is calculated in the till

Stock:
In stock
   

Description

Gtechniq Crystal Serum Light - CSL

Gtechniq Crystal Serum Light also called CSL is the private version of the world famous Gtechniq Accredited Detailer Crystal Serum Ultra. It offers 80% of the professional performance of Crystal Serum Ultra, but if applied incorrectly it can be machine buffed off your vehicle's paint which is not the case with the Gtechniq Crystal Serum Ultra.

Gtechniq Crystal Serum Ultra and Serum Light are the pinnacle of paint protection when it comes to adding shine, resisting wash scratches, repelling contaminants, dirt and water.

The Gtechniq Crystal Serum Light can provide up to 5 years of protection for your paint when applied by a Gtechniq Accredited Detailer. However, because it is a very easy to use coating, this can also be achieved by detailers who have not completed Gtechniq training and certification if the user manual is carefully followed and the coating is regularly maintained with the Gtechniq C2 Ceramic Sealant! This kind of protection, quality and durability is rarely offered by other privately available brands!

This also protects the paint against chemicals from pH 2 to pH 12, so that you can safely use any shampoo without affecting the coating.

User manual

1. Preparation

    • The process to apply the coating can take 2 to 4 hours if you are not yet experienced. Make sure that you can continue working without interruption during this period. Washing and polishing of the paint is not included in this time frame.
    • Make sure that your vehicle is not in direct sunlight, but is warmer than 5°C but colder than 25°C. Ensure the carriage is completely dry and remains dry for at least 12 hours after application and is not exposed to contamination.
    • Make sure you also have Gtechniq Panel Wipe, at least 16 microfibre cloths without rim and with a weight of at least 400GSM and that you have around 8 applicators at your disposal. Gloves are also recommended.
    • Store the product in a dry, cool place.
    • Use within 3 months of opening.

2. Paint preparation

    • Wash and decontaminate your paint thoroughly before applying coatings with a good shampoo, iron remover en tar remover.
    • If necessary or desired polish the lacquer, with machine or by hand, and remove defects. Any defects present in the paint prior to the application of CSL will remain in the paint for the duration of the coating!
    • Sprays Gtechniq Panel Wipe on a microfibre cloth and wipe each panel in small sections.

3. Apply Gtechniq Crystal Serum Light

    • Soak the application pad with 3 full bars of CSL from the pipette and work the liquid into the pad to get even saturation.
    • Place the lid back on the bottle and set it aside. Do not hold the bottle in your hand as this promotes premature curing.
    • Apply in overlapping movements with the AP2 Ultra Soft Foam Filled Applicator to an area of ​​approximately 60 by 60 cm.
    • Immediately remove residue with a microfiber cloth. You may need to wipe the same area several times with a microfiber cloth, but avoid using too much force.
    • We recommend using 2 cloths at the same time. Make sure to rotate the cloths during residue removal to prevent CSL from curing in the cloth. Also regularly replace the cloths with new cloths.
    • Inspect the surface for residue with a bright light source.
    • Remove remnants of Gtechniq Crystal Serum Light with a microfibre cloth if you can still see it anywhere. If you cannot get it away with a microfibre cloth, you can try to locally reapply the area with Gtechniq Crystal Serum Light and remove it immediately after application with a microfibre cloth. If you still cannot remove the cured remnants, you are forced to polish the entire panel again and reapply the coating to the entire panel.
    • Once you are done, place your microfiber cloths in water, was and dry them as soon as possible. However, we recommend that you simply throw away your microfiber cloths with which you have removed the coating to prevent possible damage to the paint the next time you use the microfiber cloths.

4. Aftercare of the coating

    • After applying Gtechniq CSL you should keep the car away from water and dirt for 12 hours. In addition, the car must also remain at temperatures of 5 °C and 25 °C to ensure proper drying and curing of the coating.
    • The curing of the coating can be accelerated with a specialized infrared dryer for the paint. This may also enhance the hydrophobic properties of the coating. 
    • After the coating has dried, we do not recommend washing the car for the first week or using other chemicals on the car. If the car becomes dirty between the first 24 hours and the following 6 days, you can rinse it with water.
    • For a good durability of the coating, we recommend that you maintain the coating every 2 months Gtechniq C2 Ceramic Sealant.

Video

Photo - Gtechniq Crystal Serum Light - CSL

Gtechniq Crystal Serum Light - CSL

MSDS - Material Safety Data Sheet

View the MSDS Material Safety Data Sheet from: Gtechniq Crystal Serum Light HERE.

Payment & Security

American Express Apple Pay Bancontact Google Pay Teacher Mastercard PayPal Shop pay Union Pay Visa

Your payment information is processed securely. We do not keep credit card details, nor do we have access to your credit card information.

Maybe this is also something for you?

Recently viewed