Gtechniq EXO v5

   
Schrijf een beoordeling
| 1 answered question
GtechniqItem number: EXO 0.03

Content: 30 ml
Price:
€75.99 EUR

Taxes included. Shipping is calculated in the till

Stock:
Not in stock but expected in the store 3 working days after order
   

Description

Gtechniq EXO v5

The latest generation of water and dirt repellent coating from Gtechniq is the EXO v5. This coating leverages decades of coatings experience to create the best hydrophobic coating on the market. EXO v5 makes the paint extremely smooth, water and dirt resistant and protects the paint against washing scratches and chemicals.

Because EXO v5 is so water and dirt repellent, dirt adheres much more difficult to the surface, so that your car will stay clean longer. In addition, the dirt will also be much easier to remove during a wash as it will come off much more easily. Because water cannot remain on the paint, you can also dry your car in record time without leaving water spots. The chemical resistance of EXO v5 ensures that you can also treat your car with non-pH neutral agents without the protection completely disappearing. Because EXO v5 is such a hard coating and washing and drying is so much easier, the chance of washing scratches is limited to a minimum!

The EXO v5 is the improved formula of EXO v4. EXO v5 only needs 1 layer to guarantee full functionality where EXO v4 needed 2 layers. In addition, V5 is also much smoother, water and dirt repellent and gives the paint better protection against road salt and chemicals than V4.

EXO v5 also has a very user-friendly application. EXO v5 will dry quite slowly on the paint, making it more forgiving than other coatings. You will notice that when the coating starts to sweat that it is ready to be wiped off with a microfiber cloth.

User manual

  • Gtechniq EXO v5 can be applied as a stand-alone coating or as a top coat for Gtechniq C1 Crystal Lacquer of Gtechniq Crystal Serum Light (CSL) - we recommend applying C1 or CSL as a base layer for extra durability.
  • If you are applying over C1, EXO v5 should be applied a minimum of 4 hours, but less than 12 hours after you have completed the C1 application.
  • If applying over CSL, EXO v5 should be used at least 1 hour after applying the CSL.
  • Make sure your vehicle is out of direct sunlight, but warmer than 5 degrees Celsius, completely dry, and left dry for at least 12 hours after application.
  • Wash and decontaminate your paint thoroughly with a good shampoo, iron remover en tar remover before applying.
  • If necessary or desired polish the lacquer, with machine or by hand, and remove defects. Any defects present in the paint before applying EXO v5 will remain in the paint for the duration of the coating!
  • Sprays Gtechniq Panel Wipe on a microfibre cloth and wipe each panel in small sections. If you are applying over newly applied C1 or CSL, this step is not required.
  • Shake the EXO v5 bottle well and wear gloves.
  • Prime the AP2 Ultra Soft Foam Filled Applicator evenly with a good amount of product so that the pad is saturated.
  • Put the lid back on the bottle and set it aside - do not hold the bottle in your hand as this promotes premature hardening.
  • Apply in overlapping strokes to an area of ​​approximately 60 by 60 cm.
  • After 1 to 2 minutes, remove the residue with a microfiber cloth, you may need to wipe the same area several times with a microfiber cloth, but avoid using too much force.
  • We recommend using 2 cloths at a time. Ensure cloths are rotated during residue removal to prevent EXO v5 from curing in the cloth.
  • Inspect the surface for residue with a bright light source.
  • Once you are done, place your microfiber cloths in water, was and dry them as soon as possible. However, we recommend that you simply throw away your microfiber cloths with which you have removed the coating to prevent possible damage to the paint the next time you use the microfiber cloths.
  • After applying Gtechniq EXO v5 You must keep the car away from water and dirt for 12 hours. In addition, the car must also remain at temperatures of 5 ° C and 25 ° C to ensure proper drying and curing of the coating.
  • The curing of the coating can be accelerated with a specialized infrared dryer for the paint. This may also enhance the hydrophobic properties of the coating. 
  • After the coating has dried, we do not recommend washing the car for the first week or using other chemicals on the car. If the car becomes dirty between the first 24 hours and the following 6 days, you can rinse it with water.
  • For a good durability of the coating, we recommend that you maintain the coating every 2 months Gtechniq C2 Ceramic Sealant.
  • Store the product in a dry, cool place.
  • Use within 3 months of opening.

Video

Photo - Gtechniq EXO v5

Gtechniq EXO v5

Payment & Security

American Express Apple Pay Bancontact Google Pay Teacher Mastercard PayPal Shop pay Union Pay Visa

Your payment information is processed securely. We do not keep credit card details, nor do we have access to your credit card information.

Maybe this is also something for you?

Recently viewed